![]() |
Caliper Plug Removal Tool Triumph | Norton | BSA
Item no.: Z-5459![]() Ideal tool for removing the caliper plug from Pre 82 Triumph/ Norton/BSA disc brake calipers Use of this tool helps to prevent damage Manufactured from Stainless Steel Time saver Two pin drive... |
per stuk
€
9,50
*
|
![]() |
Cylinder Head Tool - Triumph Bonneville
Item no.: Z-5460![]() Essential tool for use on the two cylinder head bolts on the last generation of Triumph Bonneville Meriden Twin 750 T140 Cylinder head tool Application Triumph Bonneville 750 T150 (Excluding aft... |
per stuk
€
9,50
*
|
![]() |
Clutch Spring Tool Triumph/ BSA/ Norton
Item no.: Z-5461![]() Assists with the removal and replacement of large clutch spring nuts on most classic British motorcycles. For removing large clutch spring nuts Application Triumph BSA and pre Norton Commando M... |
per stuk
€
26,95
*
|
![]() |
Clutch Locking Tool Triumph & BSA
Item no.: Z-5462![]() A useful tool for locking the clutch drum and centre together for easy tightening as well as the removal of the clutch centre nut. Clutch locking tool Application: BSA A7, A10 (The late 4 spring... |
per stuk
€
13,95
*
|
![]() |
Clutch Hub Puller Triumph/BSA
Item no.: Z-5463![]() An essential tool for pulling the clutch hub front from its taper on the main shaft Threading 20tpi Application Triumph 500/650/750cc and BSA 500/650 Twins from 66 onwards Manufactured from Sta... |
per stuk
€
33,95
*
|
![]() |
Valve Tappet Adjustment Tool
Item no.: Z-5464![]() As essential tool for valve and rocker adjustment Valve and rocker adjustment tool to suit tappet adjusters that have 3/16 Whitworth locknuts. Application fits most Triumph 500/650/750 twin 1950... |
per stuk
€
17,95
*
|
![]() |
Primary Chain Adjusting Tool
Item no.: Z-5466![]() For adjusting the primary chain on engines where the gearbox casing and engine are in one piece fitted to later engines Primary chain adjusting tool Application vintage Triumph 500/650/750cc T10... |
per stuk
€
9,95
*
|
![]() |
Point Seal Tool Triumph
Item no.: Z-5467![]() This tool is designed to screw into the end of the exhaust cam when refitting the timing cover expanding the oil seal over the end of the cam. Application: Triumph twin cylinder motorcycles 1963... |
per stuk
€
9,95
*
|